Call Today

 

This article below about Hot Water Heater Repair is truly intriguing. Don't overlook it.

Lots of modern homes make use of an electric hot water heater for their heating system, due to its ease as well as simplicity of use. Nevertheless, similar to any other electrical devices, issues might arise with its use, unexpectedly. It can be really aggravating to wake up to a cold shower instead of a warm one or having your bath with water that isn't warm enough or perhaps also warm. Whatever the situation might be, hot water heater problems can be quite stressful. The good news is, we have actually made a listing of feasible services to your hot water heater concerns. There are a number of factors that could cause a number of these problems, maybe an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you turn off the major power supply for security. Whatever the issue is, getting it dealt with ought to not posture way too much of a problem if you comply with these steps:

 

Check Your Power Supply:

As standard as this may seem, it is very needed. Without adequate power, your water heater will not function. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power problem. Check if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the concern, just turn it off and on again. Replace any kind of damaged or worn-out fuse. Examine the device with power after these changes to see if it's currently functioning.

 

Examine the Burner in the Hot Water Heater:

If it's not a power problem, after that try taking a look at your heating element if it is still working. Evaluate each of your burner to ensure the problem isn't with any one of them. If any one of them is malfunctioning, change that part and afterwards examine whether the warm water is back on.

 

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might require to check the temperature level settings on your upper thermostat. Make sure the breaker is switched off prior to doing anything. Open the accessibility panel and also press the red button for temperature reset above the thermostat. This ought to aid warm the water. Transform the breaker back on and also examine if the trouble has been fixed.

 

Call A Specialist:

If after changing all malfunctioning components as well as resetting your temperature level, the water heater still isn't functioning, you may need to contact a professional plumber for a professional viewpoint. The trouble with your heater could be that the hot and cold faucets have been switched over or it might be undersized for the amount of hot water required in your house. Whatever the instance may be, a professional plumber would help address the problem.

 

Verdict

Water heater problems are not constantly significant. A number of them are due to small issues like a blown fuse or worn-out heating element. Replacing the faulty components need to do the trick. However, if you are still unable to address the problem, give a call to your closest plumber to come to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I am just very curious about What Would Cause My Electric Water Heater to Stop Working? and I really hope you enjoyed the entry. Enjoyed reading our article? Please share it. Let someone else find it. We cherish reading our article about How to Troubleshoot and Repair an Electric Water Heater.

Premium plumbing emergency care here.